The Loading and Unloading regulations include a variety of new national laws that are designed to help you make sure that goods and cargo are loaded and that they are appropriately secured and protected for transportation. The regulations provide detailed guidance on dimension and weight limits for the load and vehicle, load safety requirements, special requirements for oversize or over mass loads and dangerous goods and the responsibilities of parties in the supply chain for safe load restraint.

The training takes staff through:

  • Legal obligations during loading and unloading activities
  • Preparing the goods for loading
  • Loading the goods safely
  • Securing and protect the goods appropriately
  • Unloading the goods safely at the destination
  • Completing relevant documentation

We offer three modes of delivery for programs to participants.

  • Face to Face – Onsite to minimise disruption to workforce.
  • Distance Mode – To assist with self-paced learning
  • Online – To assist with remote access and general learning programs

Basic Loading and Unloading course (Awareness)

Course Description
The “Basic Loading and Unloading course (Awareness)” uses the course content from our nationally recognised “Loading and Unloading Course” (TLID2004A: Load and unload goods/cargo) but with basic quiz-based assessment only.

This course is an introductory course only and is not recognised for “TLID2004A: Load and unload goods/cargo”. You will receive a Certificate of Completion only – not a Statement of Attainment.

You should complete this course if you are not currently working or are not in a job where you are able to demonstrate the application of safe loading and unloading strategies. If you do start working or change job roles, this course can be upgraded to the nationally recognised “Loading and Unloading” course on completion of the additional assessment tasks (including the Observation, Practical and Third Party Assessments) and further payment.

Course Outline
The “Basic Loading and Unloading course” will provide you with an overview of how to safely prepare, lift, position and restrain goods on a vehicle platform and then unload goods at the destination.

On completion of the “Basic Loading and Unloading course”, you will be able to: explain your legal obligations during loading and unloading activities  prepare the goods for loading  load the goods safely  secure and protect the goods appropriately  unload the goods safely at the destination, and  complete relevant documentation.

Course Duration
Please allow approximately 2.5-3 hours to complete this course and the online assessment quizzes to get the Certificate of Completion. If you want to upgrade to the nationally recognised “Loading and Unloading” course to get the full Statement of Attainment, you will need to allow another 1.5-3 hours to complete the additional assessments tasks.

Pre-requisite Requirements
There are no pre-requisite requirements for this course.

Click button to book.

TLID2004 Loading and Unloading course (Nationally Recognised)

CILT_Recognised

Course Outline
The ‘Loading and Unloading’ course will provide you with the skills and knowledge to safely prepare, lift, position and restrain goods on a vehicle platform and then unload goods at the destination.

On completion of the ‘Loading and Unloading’ course, you will be able to:

  • explain your legal obligations during loading and unloading activities
  • prepare the goods for loading
  • load the goods safely
  • secure and protect the goods appropriately
  • unload the goods safely at the destination, and
  • complete relevant documentation.

This course is an interactive and engaging way to build your knowledge and understanding of ways to reduce or eliminate risks during loading and unloading activities. These risks may be to you (as the loader), to those around you (such as other loaders, drivers and pedestrians), and to the load itself.

The course is narrated and includes a short optional quiz at the end of each module. Once you have completed the last module, you will need to complete the Survey, Observation Assessment and Practical Assessment.

The survey must be completed before moving on to the Observation Assessment and Practical Assessment. We value your feedback and the survey will provide the opportunity to answer a number of questions about your thoughts on the Loading and Unloading course.

The Observation Assessment will ask you to watch a video of a truck being loaded and then answer a number of questions based on what you observed in the video.

The Practical Assessment will ask you to submit a video or photos of yourself, completing a number of loading tasks, such as:

  • lifting and positioning a load on a vehicle
  • restraining the load, and
  • performing a Safety Inspection.

You will also need to answer a number of questions based on your video or photos that explain:

  • what goods you loaded
  • why you selected that vehicle
  • how your prepared the load
  • how you lifted and positioned the load
  • how you restrained it, and
  • the results of your safety inspection.

You can use an iPhone or other SmartPhone, or a small digital camera to take the video or photos – it does not have to be great quality! Once you have filmed your video or taken your photos and completed your answers and forms, you will need to log back into your course via our website and upload your answers along with your video or photos. If your video file size is more than 15MB, you can either burn it to a DVD and post it to us or use our encoding instructions to reduce the file size before you upload it. Your video or photos along with your answers will then be assessed by our team, to confirm that all steps and answers have been completed and that they meet the loading guidelines provided in this course (for example, correct load restraint selection). If you do not pass, you will receive detailed feedback and may be asked to re-submit your video or photos or incorrect answers.

The Third Party Observation Assessment will ask your manager or supervisor to observe you completing a series of tasks and complete a Third Party Evidence Report based on your tasks.

Once you have passed each assessment, you will receive a confirmation email containing your Statement of Attainment.

Course Duration
Please allow approximately 4 to 6 hours to complete this course and the related assessments.

Pre-requisite requirements
There are no pre-requisite requirements for this course.

Recurrent Training Requirements
It is recommended that learners complete the nationally recognised ‘Loading and Unloading’ course on a yearly basis to ensure their knowledge and understanding stays current. Up to date training will also help to demonstrate that reasonable steps were taken to prevent a loading or unloading related breach of Chain of Responsibility from occurring in your workplace or as a result of your activities.

Click button to register.